Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the thermostat of the Volkswagen Golf 1.6

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Thermostat

Below are the main steps to remove and replace the thermostat of the Volkswagen Golf 1.6. First, open the bonnet and start draining the coolant by removing the cover and disconnecting the coolant hose; allow the fluid to drain into a container for about ten minutes. At this point, unscrew the thermostat screws to remove it, replacing it with the new original one; reassemble everything and top up with the new antifreeze suitable for your radiator.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat Valve on a VW Golf
How to Replace the Thermostat Valve on a VW Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The thermostat valve allows the hot coolant from the engine to exchange with the cooled liquid from the radiator, thus it is constantly in contact wi…
How to Replace the Thermostat Valve on VW Golf IV
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) If you experience issues with the coolant temperature rising, one possible cause is a malfunctioning thermostat valve. Rust formation in the cooling …
Instructions for Replacing the Thermostat on Volkswagen Golf 4 1.9 TDI
Instructions for Replacing the Thermostat on Volkswagen Golf 4 1.9 TDI
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video, we will see the main instructions for removing and replacing the thermostat on a Volkswagen Golf 1.9 TDI, fourth generation. First, op…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos