Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : How to reset the tire pressure monitoring system of the Volkswagen Passat 2022.

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat 3G, MK 8, B8 - Years 2014-2023
Part: Instrument cluster
Operation: How to reset the tire pressure monitoring system of the Volkswagen Passat 2022.

If the tire pressure warning light continues to stay on continuously on the instrument panel of your 2022 Volkswagen Passat, it means that you need to inflate the tires to the correct pressures. Additionally, it may happen that the aforementioned warning light continues to stay on, and in this case, you need to follow the following steps to manually reset it. First of all, you need to enter the passenger compartment and turn on the ignition. Immediately after, open the glove compartment and locate the button on the left side. Hold it down and wait for the warning light to turn off. Finally, release the button and you are done.


Posted on 6 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Passat 2014-2023 - What does the Volkswagen Passat B8 AdBlue warning light mean? Read Answer
    • Passat 2010-2014 - How to reset service on Volkswagen Passat? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos