Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Horn Fuse Located in a Volkswagen Passat?

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

If the horn on your Volkswagen Passat suddenly stops working, first check the status of the relevant fuse, the location of which is indicated in this video. As shown, the fuse in question is located in the box inside the cabin, right next to the battery.

It is a 20A fuse and is the second to last in the last column on the right when looking at the vehicle from the front. If the fuse is blown, ensure you replace it with a spare of the same specifications and always work with the vehicle turned off to avoid damaging any components.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

Where is the Cigarette Lighter Fuse on the VW Passat?
Where is the Cigarette Lighter Fuse on the VW Passat?
Volkswagen Passat (1996-2005 / 3BG, B5) The fuse for the cigarette lighter on the Volkswagen Passat model B3 is located inside the cabin fuse box, specifically behind the left side of the d…
Where are the Fuses Located in the Volkswagen Passat?
Where are the Fuses Located in the Volkswagen Passat?
Volkswagen Passat (1996-2005 / 3BG, B5) Any fuse in the Volkswagen Passat is located within one of the designated fuse boxes present in the vehicle: in this type of vehicle, there is a sing…
Where Are the Fuses on a Volkswagen Passat?
Volkswagen Passat (1996-2005 / 3BG, B5) Each fuse in the Volkswagen Passat is located inside the single fuse box found in the vehicle. This is positioned inside the cabin, on the left side …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos