Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Volkswagen Polo 6 AW1?

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

See other generations:
Video tutorial

After correctly inflating, repairing, or replacing the tyre that was not at the correct pressure, proceed to reset the corresponding warning light. Start by turning on the ignition, and once the radio is fully powered, select the "car" option.

Do the same for the "selection" and "vehicle status" options, then scroll to the tyre pressure tab and press the virtual "set" button, and finally confirm. The procedure to reset the tyre warning light on your Volkswagen Polo AW1 has been successfully completed.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To reset the tyre pressure warning light on the Volkswagen Polo, inflate the tyres until they reach the recommended pressure value: this value is fou…
How to Reset the TPMS Light on the 2018 Volkswagen Polo
How to Reset the TPMS Light on the 2018 Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this guide for all of you who own a 2018 Volkswagen Polo, discover how to manually reset the tyre pressure monitoring system (TPMS) light at no co…
How to Reset the Service Light on the Volkswagen Polo AW1?
How to Reset the Service Light on the Volkswagen Polo AW1?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) Start the reset procedure on your Volkswagen Polo AW1 by turning on the ignition and then pressing the button on the steering wheel that allows you t…

    Frequently Asked Questions

    • Polo 2017-2025 - How do you reset the Volkswagen Polo tire pressure warning light? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos