Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the dipped beam headlamp bulb on the Volkswagen Golf VII

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

In this video, you can see how to change the dipped beam headlamp bulb on a Volkswagen Golf VII: access it easily from the front bonnet of the vehicle. From here, remove the lamp retaining clip, take out the bulb holder with its bulb.

Remember that the clear bulb of the new lamp must never be touched with bare hands, as this will shorten its lifespan. Refit it into its holder and then insert the assembly back into its housing within the headlamp unit, possibly using a light, as shown in the video.

Close the lamp retaining clip and the job is done.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

Replacing the Front Fog Light Bulb on the Volkswagen Golf 7
Replacing the Front Fog Light Bulb on the Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, you will see how to remove and replace the front fog light bulb on the seventh generation Volkswagen Golf in simple steps. First, turn…
How to replace the dipped headlight bulb of the Volkswagen Golf
How to replace the dipped headlight bulb of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide we will see step by step instructions on how to disassemble and replace the low beam bulb of the front headlight of the Volkswagen Golf…
How to Replace the Dipped Headlight Bulb on a Volkswagen Golf
How to Replace the Dipped Headlight Bulb on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In today's video, we will see how to replace the dipped headlight bulb on a sixth-generation Volkswagen Golf. First, remember to perform this operati…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos