Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling and replacing the interior light bulb of the Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Interior dome light bulb

Today's guide will show you the instructions on how to dismantle and replace the interior light bulb of the Volkswagen Golf's ceiling light. First, get into the vehicle and start prying on the side of the ceiling light to detach and remove it from the roof; then disconnect the electrical connectors found on the back, as illustrated in the video. At this point, remove the ceiling light bulb and replace it with a new one of the correct type and with the same fitting; check its operation and finally reassemble the ceiling light!

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the interior light bulb of the Volkswagen Golf 4?
How to change the interior light bulb of the Volkswagen Golf 4?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video tutorial, we will see how to remove and replace the interior light bulb of the overhead console in the fourth series Volkswagen Golf, a…
Replacing the Interior Dome Light Bulb
Replacing the Interior Dome Light Bulb
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Remove the cover of the dome light to access the bulb holder. Disconnect the dome light by removing the connector. Open the lower compartment of the …
How to replace the bulbs in the interior light of the Volkswagen Golf
How to replace the bulbs in the interior light of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today's instructions will show us how to disassemble and replace the bulbs of the interior light fixture of the Volkswagen Golf. First, we get into t…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos