Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the Alarm on the Volkswagen Golf?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

To disable the alarm on the Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboard relative to the steering column. Once the scanner is connected, select the car model and its corresponding version; this will allow you to proceed with disabling the alarm following the instructions in the tutorial. Once the procedure is complete, you can disconnect the scanner and verify that the modification has taken effect.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To deactivate the alarm of the Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port: this port is located at the bottom left of the d…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The alarm on a Volkswagen Golf can be reset by connecting a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once t…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To disable the alarm on a Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboa…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos