Do it yourself
| ||||
|
Volkswagen Golf - Video tutorial
Model: Volkswagen Golf
Golf 5, Golf V, MK 5
- Years 2003-2008 In order to deactivate the alarm of the Volkswagen Golf, you need to connect a diagnostic tool to the OBD port of the vehicle. This port is located on the lower left side of the dashboard, next to the steering column. Once the scanner is connected, you can select the specific model and version of the car, and then perform all the necessary operations to deactivate the alarm. After that, you can verify that the alarm has been deactivated by pressing the appropriate button on the remote control.
Posted on 28 April 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.042
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |