Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the Alarm on a Volkswagen Golf?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

To disable the alarm on a Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port. In this vehicle, the port is located at the lower left of the dashboard, near the steering column. Once the scanner is connected, select the car model and the corresponding version. You can then select all the options indicating the alarm's operation and disable them. After making the changes, disconnect the scanner completely.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To disable the alarm on a Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboa…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To disable the alarm on a Volkswagen Golf, there is no procedure that can be conducted through the controls on the car's onboard computer. In fact, t…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To disable the alarm on the Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port located just below the steering column; once the sca…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos