Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the Alarm on a Volkswagen Golf?

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Checks and maintenance

The alarm on a Volkswagen Golf can be reset by connecting a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once the scanner is connected, follow the instructions shown in the tutorial. By selecting the car model and its corresponding version, you can disable the alarm and then disconnect the tool. After disconnecting the scanner, verify that the operation was successful.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) To deactivate the alarm of the Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port: this port is located at the bottom left of the d…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To disable the alarm on a Volkswagen Golf, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboa…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The procedure for deactivating the alarm on the Volkswagen Golf requires connecting a diagnostic tool to the OBD port of the vehicle: this is located…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos