Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Sharan
    4. : How to remove the AdBlue warning light in the Volkswagen Sharan?

Volkswagen Sharan - Video tutorial

Model: Volkswagen Sharan MK 2, 7N - Years 2010-2023
Part: Checks and maintenance
Operation: How to remove the AdBlue warning light in the Volkswagen Sharan?

If the AdBlue warning light has come on in the instrument panel of our Volkswagen Sharan, it means that the pollution control system liquid has reached the minimum level and therefore needs to be topped up. This is an extremely simple and quick procedure, let's see how to proceed in this tutorial. First of all, let's purchase a 10-liter can of urea from any car parts store, then turn off the engine and open the trunk door. Next, remove the small panel located on the lower left wall, unscrew the cap that has just been released, and using the provided tube, pour in the necessary amount of liquid to reach the maximum level.


Posted on 3 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Sharan 2010-2023 - How to unlock the trunk of the Volkswagen Sharan? Read Answer
    • Sharan 1995-2010 - Where is the tire repair kit located in the Volkswagen Sharan? Read Answer
    • Sharan 2010-2023 - Where is the jack of the Volkswagen Sharan located? Read Answer
    • Sharan 2010-2023 - How to remove the AdBlue warning light in the Volkswagen Sharan? Read Answer
    • Sharan 2010-2023 - What problems have been encountered with the Volkswagen Sharan AdBlue system? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos