Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Radio Settings of a Volkswagen Polo?

Model: Volkswagen Polo 6R, Polo V, MK V, Polo 5, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
This video is currently unavailable

Good morning! The goal today is to completely reset the radio settings of your Volkswagen Polo. Start by sitting in the driver's seat. Next, turn on the radio by pressing the appropriate button.

At this point, press and hold the "Hold" button. After five seconds, the radio will emit a sound alert, and you can release the button.

By doing this, you will have successfully completed the reset procedure for the radio of your Volkswagen Polo. Thank you for following along; we hope to see you again!


Updated on 14 September 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2017-2025 / Polo 6, MK 6, MK VI, AW1, Polo VI) To reset the radio on the Volkswagen Polo, turn on the instrument panel by inserting the key into the ignition switch. Once powered on, navigate thro…
Volkswagen Polo (2017-2025 / Polo 6, MK 6, MK VI, AW1, Polo VI) To reset the Volkswagen Polo car radio, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once…
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) In this tutorial, you will see how to reset the factory settings of the radio in a Volkswagen Polo, a very simple operation to perform, for example, …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Polo 2017-2025 - The EPC light of the Volkswagen Polo 1.0 TSI Sport BMT is on, what can I do? Read answer

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos