Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Inner Door Panel on a Volkswagen Polo

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Handle

See other generations:
Video tutorial

Open the door and use a plastic lever to remove the plastic covers from both the armrest and the window lift handle. Then unscrew the bolts from the various holes, and also unscrew the clips or screws located on the inner sides of the door.

Now you can start to completely remove the inner door panel using a plastic lever, starting from the bottom to avoid damaging the clips. Disconnect all cables connected to the door and replace the entire panel if necessary, retracing all the steps described.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of a Volkswagen Polo
Removing the Front Door Panel of a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) This guide illustrates how to disassemble and remove the front door panel of a Volkswagen Polo. First, open the front door of the vehicle and start r…
Removing the Front Door of the Volkswagen Polo
Removing the Front Door of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Below are the instructions to remove and replace the front door of the Volkswagen Polo. First, open the front door and start unscrewing the fixing sc…
Replacing the External Wing Mirror of the Volkswagen Polo
Replacing the External Wing Mirror of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) This guide outlines the steps to remove and replace the external wing mirror of the Volkswagen Polo. First, open the front door of the vehicle and be…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos