Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a VW Up

Model: Volkswagen Up MK 1 - Years 2011-2024
Part: Tail light bulb

Replacing the rear headlamp bulb on a Volkswagen Up is straightforward. Thanks to our short video tutorial, it will only take a few minutes. First, open the boot and then use a plastic lever to remove the internal side cover of the headlamp. Once the cover is removed, disconnect the headlamp connector and unfasten the retaining screws. After that, remove the headlamp and then the screw that secures the light unit. Once the light unit is open, you can remove and insert the bulb. Refit the headlamp by reversing the procedure.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Volkswagen Up?
How do you replace the rear headlight bulb of the Volkswagen Up?
Volkswagen Up (2011-2024 / MK 1) In order to replace the rear headlight bulb of the Volkswagen Up, you will need to open the rear hatch so that you can detach the side panel near the…
How to replace the rear light bulb of the VW Up.
Volkswagen Up (2011-2024 / MK 1) Today we will explain how to replace the front bulb of the Volkswagen Up. To carry out the bulb replacement, we need to open the front hood and remov…
Replacing the Front Headlight Bulb on a Volkswagen Up
Replacing the Front Headlight Bulb on a Volkswagen Up
Volkswagen Up (2011-2024 / MK 1) Let's see how to replace the damaged bulb of the front headlight. Lift the front bonnet by pulling the lever located at the bottom right of the dashb…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos