Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Volkswagen Golf?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on a Volkswagen Golf, lift the car to loosen the bolts securing the front right wheel. Once this wheel is removed, you can also take off the corresponding wheel arch liner and proceed to loosen the central nut of the tensioner pulley.

At this point, reduce the tension on the belt so that it can be removed. After removing the old belt, fit the new one, tensioning it with the installation of the tensioner pulley and checking its correct operation.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Guide to Replacing the Timing Belt on a Volkswagen Golf 1.4 TSI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's main information will show you how and when to replace the timing belt on a Volkswagen Golf 1.4 TSI. For this type of engine, the timing belt…
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Guide to replacing the timing belt of the Volkswagen Golf 1.6 TDI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below we will discover information on how to disassemble and replace the timing belt of the Volkswagen Golf 1.6 TDI; the manufacturer states that, on…
How to Replace the Timing Belt on a Volkswagen Golf 1.4L
How to Replace the Timing Belt on a Volkswagen Golf 1.4L
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Here are the instructions on how to remove and replace the timing belt on a Volkswagen Golf 1.4 petrol, following these simple steps. First, lift the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos