Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery on a Volkswagen Golf

Model: Volkswagen Golf MK 6, Golf 6, Golf VI, 5K1 - Years: 2008, 2009, 2010, 2011, 2012
Part: Battery

See other generations:
Video tutorial

Open the engine bonnet. Remove the battery cover to access the battery.

Loosen the screws on both the positive and negative terminals. Disconnect the terminals from the battery.

Remove the side plastic cover and unscrew the bolt of the lower battery bracket. Extract the old battery using the convenient handle.

Clean any debris inside the battery tray. Position the new battery in the tray.

Screw in the 13 mm bolt to secure the battery. Connect the terminals to their respective poles.

Tighten the screws and secure the terminals with a 10 mm socket wrench. Refit the plastic battery cover.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) To complete the procedure that allows you to independently replace the battery inside the key of your Volkswagen Golf Mk6, you must read and apply th…
Volkswagen Golf (2019-2026 / Golf Viii, MK 8, Golf 8) To replace the remote battery on the Volkswagen Golf 8, detach the cover on the back of the device. Once the cover is removed, you will have access t…
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) Start by pressing the button located on the back of the key fob for your Volkswagen Golf to open the physical key. Then, using a flathead screwdriver…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos