Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuses of the Volkswagen Golf car radio

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Car stereo

In this video tutorial, we will see how to access the fuses of the car radio and how to replace them on the Volkswagen Golf. First, we open the hood of the car and start removing the plastic cover of the fuse box; then we check the status of the radio fuse indicated, as shown in the video. We find the other radio fuses integrated with it, as well as behind the radio; it will therefore be necessary to remove it to access them. Once all the faulty fuses have been replaced, we can reassemble and test the operation of the car radio, following the video tutorial until the end!

Posted on 9 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Radio from the Volkswagen Golf
Removing the Radio from the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this short and simple guide, you will see the steps to remove and replace the original radio of the Volkswagen Golf. First, get in the car and sta…
Where Are the Fuses on a Volkswagen Golf 5?
Where Are the Fuses on a Volkswagen Golf 5?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Each fuse on a Volkswagen Golf 5 is located within one of the two fuse boxes installed in the vehicle. The first fuse box is situated inside the cabi…
How to Remove the Radio from a VW Golf 5
How to Remove the Radio from a VW Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The steps to remove the radio from a Volkswagen Golf 5 are: - remove the side cover; - unscrew the four Torx screws; - extract the radio; - disconnec…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos