Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Alarm on a Volkswagen Transporter?

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

To disable the alarm on a Volkswagen Transporter, connect a diagnostic tool to the vehicle's OBD port: in this type of vehicle, the port is located in the lower left part of the dashboard, relative to the steering column. Once the scanner is connected, select the car model in question and its corresponding version.

At this point, you can perform all operations to disable the alarm. You can then verify that it has been disabled using the appropriate remote control.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to Deactivate the Internal Alarm on the Volkswagen Transporter T5
How to Deactivate the Internal Alarm on the Volkswagen Transporter T5
Volkswagen Transporter (2003-2014 / T5, MK 5) In today's tutorial video, learn how to deactivate the internal alarm on the Volkswagen Transporter, series T5, by following these simple steps. Insi…
How do you deactivate the alarm of the Volkswagen Transporter?
How do you deactivate the alarm of the Volkswagen Transporter?
Volkswagen Transporter (2003-2014 / T5, MK 5) It will be possible to deactivate the alarm of the Volkswagen Transporter by connecting a diagnostic tool to the OBD port of the vehicle: this port w…
How to Disable the Alarm on the Volkswagen Transporter?
How to Disable the Alarm on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) To disable the alarm on the Volkswagen Transporter, locate the specific button that allows you to deactivate this function: this button is located in…

    Frequently Asked Questions

    • Transporter 2014-2025 - Where is the OBD port located on the Volkswagen Transporter? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos