Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery of a Volkswagen Golf?

Model: Volkswagen Golf Golf 7, Golf VII, MK 7 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

To replace the key battery of a Volkswagen Golf, start by pressing the button to release the physical key. Once the key is extracted, locate a small slot on the bottom of the key. Use a small flat screwdriver to gently pry in the slot and open the key shell in two halves.

Remove the top cover to access the battery compartment.

Note the orientation of the battery before removing it. Carefully extract the old battery, usually a CR2032 button battery. Insert the new battery in the same orientation, ensuring the positive (+) side is facing upwards.

Reassemble the two halves of the key shell, pressing them together until you hear a click indicating they are securely closed. Finally, reinsert the physical key into its housing.

Your key should now function correctly with the new battery.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) Start by pressing the button located on the back of the key fob for your Volkswagen Golf to open the physical key. Then, using a flathead screwdriver…
Volkswagen Golf (1997-2003 / MK 4, Golf 4, Golf IV) Today we will explain how to replace the battery of the key remote for the Volkswagen Golf IV on your own. To replace the battery, we need to lift th…
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) This video tutorial shows the procedure for changing the battery in the key of the Volkswagen Golf 7. The battery to be inserted into the key is a CR…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos