Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Volkswagen T-Cross

Model: Volkswagen T Cross MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

Video tutorial

By following these brief and simple instructions, you will see how to reset the service light for the regular maintenance oil change on the Volkswagen T-Cross. First, get inside the vehicle and turn on the ignition; then use the controls on the steering wheel to navigate to the mileage range and hold down the "ok" button for about ten seconds (until the service menu appears), as shown in the video.

At this point, go to the "service inspection" option and confirm the reset of the oil change light, thus resetting the maintenance key!


Updated on 7 October 2026 by ScegliAuto


Related tutorials

Resetting the Service and Maintenance Light on a Volkswagen T-Cross
Resetting the Service and Maintenance Light on a Volkswagen T-Cross
Volkswagen T Cross (2019-2026 / MK 1) .. routine maintenance oil change on a Volkswagen T-Cross. First, get inside the vehicle and start the instrument cluster; then go to the vehicle settings.. …
Resetting the Service Light of the Volkswagen T-Cross
Resetting the Service Light of the Volkswagen T-Cross
Volkswagen T Cross (2019-2026 / MK 1) .. maintenance oil change of the Volkswagen T-Cross. First, get into the cabin and start the instrument cluster; then go to the on-board computer settings.. …
How to reset the Service light on the Volkswagen T-Cross?
Volkswagen T Cross (2019-2026 / MK 1) .. To reset the Service light on the Volkswagen T-Cross, turn on the ignition and press and hold the OK button located on the right side of the steering.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos