Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor in the Volkswagen Golf?

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Starter motor

See other generations:
Video tutorial

This tutorial shows how to replace the starter motor in the Volkswagen Golf, a task that requires good manual skills. First, open the bonnet, then disconnect the battery to work safely.

Next, go underneath the vehicle, locate the starter motor, and disconnect all the various connectors in front of it. At this point, simply undo the nuts from the power terminals and the securing bolts, separate the starter motor from the mount, and position the replacement.

To reassemble, just follow the reverse procedure.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor on a VW Golf 4
How to Remove the Starter Motor on a VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Learn how to remove the starter motor from a Volkswagen Golf 4. After removing the engine cover from the car, locate the starter motor. Disconnect th…
How to Replace the Starter Motor in the Volkswagen Golf?
How to Replace the Starter Motor in the Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the starter motor in the Volkswagen Golf, first open the bonnet to access the engine bay and disconnect the battery terminals. Next, loose…
How to Remove the Starter Motor from a Volkswagen Golf
How to Remove the Starter Motor from a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Before you begin, open the bonnet of your Volkswagen Golf. Start by disconnecting the two battery terminals, then remove the battery itself. Next, re…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos