Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the start button on the Volkswagen Tiguan MK2

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Push button

See other generations:
Video tutorial

How to proceed if you need to remove the faulty start button from the console of a Volkswagen Tiguan MK2? No one thinks that the start button can fail, but it is a normal component that can break like anything else on your car. If you do not purchase an original part, be very careful about how the top of the button is oriented; not all are correctly oriented.

First, remove the gear knob cover, then take out the screws that secure the frame around the cover and remove that as well.

The button is inserted in it: disconnect the plug by pressing the tab at the bottom of the connector, pull out the damaged button and replace it with the new one. Reconnect the electrical plug and replace the frame with its screws. Refit the gear knob cover and the job is done.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Let's see the instructions on how to reset the maintenance service light of the engine oil change for the Volkswagen Tiguan. First, we get into the c…
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) In this guide we will see the procedure for resetting the regular maintenance reminder for the engine oil change (service) of the Volkswagen Tiguan. …
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) In this new mini guide for your second series Volkswagen Tiguan (2018), you will learn how to manually reset the maintenance light without using any …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos