Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Volvo V40?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Service warning light

The Service light that appears on the instrument panel of the Volvo V40 can be reset by turning the ignition key to the on position and then holding down the OK button located at the end of the lever to the left of the steering wheel. This will cause the red light to start flashing, and when it disappears completely, you can turn off the instrument panel. At this point, you will need to turn it back on by turning the key and checking that the Service light has disappeared from the instrument panel. You can verify that the light has disappeared by restarting the panel.

Posted on 30 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, insert the key into the ignition switch, but do not turn on the instrument panel. Then, press and hold t…
How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, to reset the Service light, turn on the instrument cluster by turning the ignition key in the ignition switch, then press and hold …
How to Reset the Service Light on the Volvo V40?
How to Reset the Service Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn on the instrument cluster by turning the key in the lock and then press and hold the OK button loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos