Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear wiper blade of the Volvo XC90 1

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

If the rear wiper blade of the Volvo XC 90, when activated, leaves dirty areas on the glass, it is good practice to replace it to ensure good rear visibility in bad weather. To carry out the replacement, move to the rear of the vehicle, lift the wiper arm, lever above the attachment and remove the blade.

Take the replacement, check that the measurements are compatible, insert the attachment into the slot on the arm and push until it locks, check its mobility and place the blade on the rear glass.


Posted on 6 February 2025 by ScegliAuto


Related tutorials

How to replace the windshield wiper blades of the Volvo XC90
How to replace the windshield wiper blades of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today we will explain how to replace the front wiper blades on a Volvo XC90 vehicle produced from 2002 to 2014. To perform this simple operation, we …
Replacing the Rear Windshield Wiper Blade
Replacing the Rear Windshield Wiper Blade
Volvo Xc90 (2002-2014 / MK 1) Replacing the rear windshield wiper blade is very simple: before proceeding with the replacement, ensure that the new blade is fully compatible in bo…
Where are the fuses located in the Volvo XC90?
Where are the fuses located in the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) All fuse boxes in the Volvo XC90 contain the fuses that regulate the operation of the devices present in the vehicle: this type of vehicle has four. …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos