Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service in the Volvo XC60?

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

In this tutorial we can see how to reset the service in the Volvo XC60, an extremely simple and fast operation, to be carried out only after completing all scheduled maintenance work. First of all, let's go inside the cabin, then insert the key and press the start button once.

Then press and hold the "OK" button at the end of the left control lever, simultaneously turn on the instrument panel and keep the button in position until the third flash on the yellow "i" display. Finally, restart the vehicle to complete the procedure.


Posted on 12 September 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…
How to Reset the Service Light on the Volvo XC60?
How to Reset the Service Light on the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on the Volvo XC60, insert the key into the ignition switch and turn it to position 1, which only powers the instrument clu…
How to Reset the Service Light on a Volvo XC60
How to Reset the Service Light on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, press and hold the button located on the right side of the instrument cluster. While holding this button,…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos