Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Volvo V40?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Service warning light

It will be possible to completely eliminate the Service light that is shown on the instrument panel of the Volvo V40 by first turning on the instrument panel, inserting the key, and then holding down the OK button located at the end of the lever to the left of the steering wheel. This will cause a red light to flash, and when it disappears completely, it will be possible to deactivate the instrument panel. Now it will be necessary to activate it again, checking that the Service light has disappeared from the instrument panel. To verify that the light has actually turned off, it will be necessary to turn off and turn on the instrument panel again.

Posted on 20 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo V40?
How to Reset the Service Light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the service light on a Volvo V40, turn on the instrument cluster by turning the key, then press and hold the "OK" button located at the end …
How to Reset the Service Light on the Volvo V40?
How to Reset the Service Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, the procedure to reset the Service light involves turning on the ignition by rotating the key, then pressing and holding the OK but…
How do you reset the Service light of the Volvo V40?
How do you reset the Service light of the Volvo V40?
Volvo V40 (2012-2019 / MK 2) The Service light of the Volvo V40 can be reset by turning on the instrument panel, inserting the ignition key, and then pressing the OK button locat…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos