Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo V40?

Model: Volvo V40 MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a Volvo V40, turn the ignition key to switch on the instrument panel. Then, press and hold the OK button located at the end of the lever on the left side of the steering wheel.

A red light will start to flash, and when it disappears completely, you can switch off the instrument panel. At this point, turn it on again, confirming that the Service light has disappeared from the instrument panel; once verified that the light has been reset, you can finally switch off the instrument panel.


Updated on 29 August 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn the ignition on by rotating the key. Then, press and hold the OK button located at the end of the l…
How do you reset the Service light of the Volvo V40?
How do you reset the Service light of the Volvo V40?
Volvo V40 (2012-2019 / MK 2) You can completely remove the Service light from the instrument panel of the Volvo V40 by first turning on the instrument panel, turning the key, and…
How to Reset the Service Light on a Volvo V40?
How to Reset the Service Light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, resetting the Service light is done by turning on the instrument panel by turning the key and then holding down the OK button locat…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos