Do it yourself
Frequently asked questions about cars and motorcycles

Dismantling the Rear Seat

Model: Volvo S70 MK 1 - Years 1996-2000
Part: Rear bench seat

To dismantle the rear seat, or the backrest of the rear seat, first fully tilt the backrest forward. Next, remove the side cushion of the seat, which is along the pillar, near the seatbelt: simply pull it to unclip it, facilitating the subsequent dismantling operations. You can now unclip the backrest that was previously reclined by pulling it from the base to free it from the specific clips: take care during this operation as the clips can be particularly tight.

Updated on 5 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Volvo S70 (1996-2000 / MK 1) Obtain a replacement drive shaft, then lift the vehicle on the ramp and remove the wheel. The necessary tools are: 18 mm and 19 mm socket spanners, a…
Volvo S70 (1996-2000 / MK 1) Disassembling the gear lever knob is extremely simple as it does not require any tools. The gear knob is merely clipped onto the lever via plastic ta…
Volvo S70 (1996-2000 / MK 1) For vehicles that travel on snow-covered roads treated with salt during winter, the oxidation of brake discs and calipers is an inevitable phenomenon…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos