Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mirror Cap on a Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Side mirror

Using a thin but sturdy plastic tool and prying, start by removing the mirror by simply dislodging it. Once you have dislodged the mirror, disconnect the rear electrical connectors to remove it completely. This will expose the clips that secure the cap to the mirror. Proceed to unclip these four securing clips. At this point, you can dislodge the mirror cap and remove it completely. Once you complete this step, you will have successfully finished the removal.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Volvo XC60
How to disassemble the external rearview mirror of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today's steps will allow us to dismantle and replace the external rearview mirror of the Volvo XC60. First, we open the front door of the car and sta…
Removing the Mirror from a Volvo XC60
Removing the Mirror from a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Is the external mirror of your Volvo XC60 broken? Do you want to replace it? Let's see how. Pry off the mirror using a plastic lever. Apply pressure …
How to replace the glass of the external rearview mirror of the Volvo XC60
How to replace the glass of the external rearview mirror of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) In this short and simple guide, we will see how to disassemble and replace the glass of the external rearview mirror of the Volvo XC60. First of all,…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos