Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the glass of the external rearview mirror of the Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Side mirror

In this short and simple guide, we will see how to disassemble and replace the glass of the external rearview mirror of the Volvo XC60. First of all, let's move to the side of the vehicle and start levering on the side of the mirror glass, until it detaches and remove it; then disconnect the small electrical connector, as shown in the video. At this point, install the new mirror glass, making sure that the mirror supports are in good condition; finally, adjust the glass using the control located inside the cabin!

Posted on 13 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Volvo XC60
How to disassemble the external rearview mirror of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today's steps will allow us to dismantle and replace the external rearview mirror of the Volvo XC60. First, we open the front door of the car and sta…
Disassembly of the exterior rearview mirror of the Volvo XC60
Disassembly of the exterior rearview mirror of the Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Following these brief and simple instructions, we will see the process of disassembling and replacing the external rearview mirror of the Volvo XC60.…
How to Replace the Exterior Rearview Mirror on a Volvo XC60
How to Replace the Exterior Rearview Mirror on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) To replace the exterior rearview mirror on a Volvo XC60, remove the screws that secure the panel to its housing, allowing it to be detached from its …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos