Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Mirror from a Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Side mirror

Is the external mirror of your Volvo XC60 broken? Do you want to replace it? Let's see how. Pry off the mirror using a plastic lever. Apply pressure until the glass separates from the mirror housing (disconnect the power cable); this is a delicate operation because the glass or the mirror housing could break. Install the new mirror, ensuring the plastic clips snap into place on the mirror housing. Adjust the mirror to your preferred viewing angle. Replace the mirror cap if it breaks during the removal process.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the exterior rearview mirror of the Volvo XC60
Disassembly of the exterior rearview mirror of the Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Following these brief and simple instructions, we will see the process of disassembling and replacing the external rearview mirror of the Volvo XC60.…
How to replace the glass of the external rearview mirror of the Volvo XC60
How to replace the glass of the external rearview mirror of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) In this short and simple guide, we will see how to disassemble and replace the glass of the external rearview mirror of the Volvo XC60. First of all,…
How to Remove the Mirror Cap on a Volvo XC60
How to Remove the Mirror Cap on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Using a thin but sturdy plastic tool and prying, start by removing the mirror by simply dislodging it. Once you have dislodged the mirror, disconnect…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos