Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal Light in the XC60 Mirror

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Side mirror

How to replace the turn signal light in the XC60 mirror? Let's see how to remove the external mirror of the Volvo. Remove the mirror from the housing by gently prying between the frame and the mirror (be careful not to break it). Unscrew the screws with a screwdriver located on the inside of the mirror. After this, use a pry tool to remove the mirror cap. Disconnect the turn signal light from the mirror (unplug the power connectors). Install the new turn signal light with the included screws, then reinstall the mirror in its housing. Turn on the side signal and check its operation.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the external rearview mirror of the Volvo XC60?
How do you replace the external rearview mirror of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) It will be possible to replace the external rearview mirror of the Volvo XC60 by levering with an object to remove the cover cap: once this has been …
How to disassemble the external rearview mirror of the Volvo XC60
How to disassemble the external rearview mirror of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today's steps will allow us to dismantle and replace the external rearview mirror of the Volvo XC60. First, we open the front door of the car and sta…
How to Replace the Exterior Rearview Mirror on a Volvo XC60
How to Replace the Exterior Rearview Mirror on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) To replace the exterior rearview mirror on a Volvo XC60, remove the screws that secure the panel to its housing, allowing it to be detached from its …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos