Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel of the Volvo XC60?

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Door trim panel

To replace the door panel of the Volvo XC60, loosen the bolts located at the bottom of the armrest, above the door pocket. Once these screws are loosened, detach the three clips that secure the cover near the outside rearview mirror and remove it. Using a lever tool, unclip the clips that hold the actual panel, starting from the bottom. Once the panel is unclipped, disconnect all connectors and completely remove the panel.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo Xc60 (2017-2026 / MK 2) To remove the door panel of the Volvo XC60, use a tool like a screwdriver to pry off the fabric cover of the inner handle area. Next, lift the window…
Volvo Xc60 (2017-2026 / MK 2) In this tutorial, you will see how to remove the front door panel on a Volvo XC60, a very simple and quick operation. First, open the door you will b…
Volvo Xc60 (2017-2026 / MK 2) In this video, we will see how to dismantle the rear door panel of a Volvo XC60. We will start by removing the cover inside the interior door handle,…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos