Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door panel of a Volvo XC60

Model: Volvo Xc60 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car door

See other generations:
Video tutorial

In this video, we will see how to dismantle the rear door panel of a Volvo XC60. We will start by removing the cover inside the interior door handle, where we will find a screw that needs to be removed. There is another screw at the bottom, and another hidden under the button that controls the rear window; we will remove the switch by levering it with a small screwdriver, then disconnect the electrical connector.

After that, we lift the panel upwards to release all the holding clips and then disconnect the electrical connectors. Operation completed.


Posted on 1 April 2025 by ScegliAuto


Related tutorials

How to disassemble the rear light of the Volvo XC60
How to disassemble the rear light of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today we will discover the information and instructions that will allow us to disassemble and replace the rear taillight of the Volvo XC60. First, we…
How to Remove the Door Panel of the Volvo XC60?
How to Remove the Door Panel of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To remove the door panel of the Volvo XC60, use a tool like a screwdriver to pry off the fabric cover of the inner handle area. Next, lift the window…
How to Remove the Door Panel of the Volvo XC60?
How to Remove the Door Panel of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To replace the door panel of the Volvo XC60, loosen the bolts located at the bottom of the armrest, above the door pocket. Once these screws are loos…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos