Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : How do you replace the exterior handle of the Volvo XC60?

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Handle
Operation: How do you replace the exterior handle of the Volvo XC60?

The replacement of the external handle of the Volvo XC60 is done by opening the door, so that access to its side is obtained: here it will be possible to find the screws that secure the lock actuator to its housing. By unscrewing these screws, it will be possible to remove the lock cylinder from inside its housing, so that the handle itself can then be removed from its position; at this point, the new handle can be inserted, also positioning the corresponding actuator. The latter can now be fixed with the side screws of the door, verifying its operation.


Posted on 24 December 2023 by ScegliAuto



How do I remove the outside handle of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In order to remove the external handle of the Volvo XC60 you have to open the door and loosen the screw located inside the side hole. While unscrewin
How do you replace the external handle of the Volvo XC60?
Volvo Xc60 (2017-2024 / MK 2) In order to replace the external handle of the Volvo XC60, you need to open the door so that you have access to its side. Here, it will be possible t
How do you remove the door panel of the Volvo XC60?
Volvo Xc60 (2017-2024 / MK 2) In order to remove the door panel of the Volvo XC60, you need to use an object such as a screwdriver to pry and detach the fabric cover of the intern

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos