Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Handle of the Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Handle

To remove the exterior handle of the Volvo XC60, open the door and loosen the screw located inside the side hole. While unscrewing this screw, grip the handle and pull it outward. Once the screw is completely removed, first take off the part of the handle near the locking mechanism, and after removing this part, also pull off the other part of the handle. After removing the old handle, you can insert the new one and secure it by reinserting the screw into the side of the door. After insertion, check the proper functioning of the opening mechanism.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exterior Handle on a Volvo XC60?
How to Replace the Exterior Handle on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To replace the exterior handle on a Volvo XC60, open the door to access the side panel. Here, you will find the screws that secure the lock actuator …
How to Replace the Exterior Handle on a Volvo XC60?
How to Replace the Exterior Handle on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To replace the exterior handle on a Volvo XC60, open the door to access its side. Here, you will find the screws that secure the lock actuator to its…
How to Remove the Outer Door Handle on a Volvo XC60
How to Remove the Outer Door Handle on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) In this video tutorial, you will learn how to remove the outer door handle on the rear door of a Volvo XC60, following the instructions below. First,…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos