Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Handle on a Volvo XC60?

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Handle

To replace the exterior handle on a Volvo XC60, open the door to access the side panel. Here, you will find the screws that secure the lock actuator to its housing. By loosening these screws, you can remove the lock cylinder from its housing, allowing the handle to be taken out. At this point, insert the new handle and position the actuator as well. The actuator can now be secured with the side screws of the door, ensuring everything functions properly.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Exterior Handle of the Volvo XC60?
How to Remove the Exterior Handle of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To remove the exterior handle of the Volvo XC60, open the door and loosen the screw located inside the side hole. While unscrewing this screw, grip t…
How to Remove the Outer Door Handle on a Volvo XC60
How to Remove the Outer Door Handle on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) In this video tutorial, you will learn how to remove the outer door handle on the rear door of a Volvo XC60, following the instructions below. First,…
How to Replace the Exterior Handle on a Volvo XC60?
How to Replace the Exterior Handle on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To replace the exterior handle on a Volvo XC60, open the door to access its side. Here, you will find the screws that secure the lock actuator to its…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos