Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Outer Door Handle on a Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Handle

In this video tutorial, you will learn how to remove the outer door handle on the rear door of a Volvo XC60, following the instructions below. First, open the rear door and remove the rubber plug located on the side. Then, use a T20 Torx wrench to remove the fastening screw for the handle found inside the hole, as shown in the video. At this point, remove the rectangular piece of the handle first, and then remove the handle itself. Apply the reverse procedure for reassembly, following the video until the end!

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Exterior Handle of the Volvo XC60?
How to Remove the Exterior Handle of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To remove the exterior handle of the Volvo XC60, open the door and loosen the screw located inside the side hole. While unscrewing this screw, grip t…
How to Replace the Exterior Handle on a Volvo XC60?
How to Replace the Exterior Handle on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To replace the exterior handle on a Volvo XC60, open the door to access the side panel. Here, you will find the screws that secure the lock actuator …
How to Replace the Exterior Handle on a Volvo XC60?
How to Replace the Exterior Handle on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To replace the exterior handle on a Volvo XC60, open the door to access its side. Here, you will find the screws that secure the lock actuator to its…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos