Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Volvo XC60?

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Door trim panel

To remove the door panel of the Volvo XC60, use a tool like a screwdriver to pry off the fabric cover of the inner handle area. Next, lift the window switch, disconnecting its connector from the bottom. Then, by removing the screw in the center bottom of the panel, you can fully detach it by disconnecting the additional connectors underneath. The new panel can be inserted and secured with the appropriate screws to the door.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Volvo XC60?
How to Remove the Door Panel of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To replace the door panel of the Volvo XC60, loosen the bolts located at the bottom of the armrest, above the door pocket. Once these screws are loos…
How to Remove the Front Door Panel on a Volvo XC60?
How to Remove the Front Door Panel on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) In this tutorial, you will see how to remove the front door panel on a Volvo XC60, a very simple and quick operation. First, open the door you will b…
How to disassemble the rear door panel of a Volvo XC60
How to disassemble the rear door panel of a Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) In this video, we will see how to dismantle the rear door panel of a Volvo XC60. We will start by removing the cover inside the interior door handle,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos