Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on a Volvo XC60?

Model: Volvo Xc60 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the front door panel on a Volvo XC60, a very simple and quick operation. First, open the door you will be working on. Then, using a plastic trim tool, remove the small cover located inside the armrest and remove the screw that is now exposed with a T20 Torx wrench.

Next, pull out the window switch panel, disconnect the connector, and remove the additional mounting screw. At this point, grasp the panel, pull it outward, and separate it from the door.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to disassemble the rear door panel of a Volvo XC60
How to disassemble the rear door panel of a Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) In this video, we will see how to dismantle the rear door panel of a Volvo XC60. We will start by removing the cover inside the interior door handle,…
How to Remove the Door Panel of the Volvo XC60?
How to Remove the Door Panel of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To replace the door panel of the Volvo XC60, loosen the bolts located at the bottom of the armrest, above the door pocket. Once these screws are loos…
How to Remove the Door Panel of the Volvo XC60?
How to Remove the Door Panel of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To remove the door panel of the Volvo XC60, use a tool like a screwdriver to pry off the fabric cover of the inner handle area. Next, lift the window…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos