Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headrest on Volvo XC40

Model: Volvo Xc40 MK 1 - Years 2017-2026
Part: Seat

Look at the plastic bases of the two posts of the headrest: one will have the button to raise the headrest, while the other will have a small hole. Insert a tool that can fit through the hole and push the release (not visible) inside. Meanwhile, lift the headrest until it is completely removed. As you can see, removing the headrest is very simple, not only on this car model but on many others as well. The presence of the hole to unlock the headrests is found on many makes and models of cars, not just Volvo.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you adjust the position of the headrest in the Volvo XC40?
How do you adjust the position of the headrest in the Volvo XC40?
Volvo Xc40 (2017-2026 / MK 1) Thanks to the video guide attached here, we have the opportunity to understand how and where to act to adjust and even remove the headrest of the sea…
Where to Find the Fuse Box of the Volvo XC40
Where to Find the Fuse Box of the Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) To easily locate the fuse box in your Volvo XC40 (model years 2017-2023), follow these steps. First, park the vehicle safely on a flat surface and tu…
Where to Find the Fuse Box on the 2023 Volvo XC40
Where to Find the Fuse Box on the 2023 Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) If you own a 2023 Volvo XC40 and don't know where the fuse box is located, just read this guide carefully and follow the described procedure. First, …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos