|
Do it yourself
| |||
| ||||
How to Replace the Remote Battery of a Volvo XC40
Model: Volvo Xc40
MK 1
- Years 2017-2026
In this guide, you will learn how to replace the battery in the remote of your Volvo XC40. To start, locate a lever on the metal part at the bottom of the key (the one with the keyring hole); pull it as shown at minute 2:15; this will allow one side of the remote (the one with the Volvo logo) to slide out. Once extracted, pull another small lever, which you will find again near the metal part: holding the open side toward you and the keyring hole to the right, the lever will be at the top right, as shown at minute 3:50. This will allow you to extract the other plastic face of your remote. At this point, you will find the battery compartment; to open it, you will need to slightly rotate it counterclockwise with the help of a screwdriver or a key; this will allow you to remove the plastic cover. You can then proceed to remove the old battery and insert the new one, with the positive terminal facing you. Finally, you can reinsert the battery cover (rotating it clockwise) and the two plastic faces of your remote.
Updated on 1 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Volvo Xc40
(2017-2026 /
MK 1)
In order to replace the battery of the Volvo XC40 remote control, you need to slide the panel on the back of the device so that you can access the in…
Volvo Xc40
(2017-2026 /
MK 1)
Today, with the help of this short video tutorial, follow these steps to replace the battery in the remote/key fob of the Volvo XC40. The first step …
Volvo Xc40
(2017-2026 /
MK 1)
In this tutorial we can see how to replace the battery of the Volvo XC40 remote control, an extremely simple and fast operation. To do this, we will …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.255
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |