Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : How to replace the key battery of the Volvo XC60

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Key
Operation: How to replace the key battery of the Volvo XC60

To correctly and safely replace the battery inside the smart key of your Volvo XC60 MK1 you will only need a common flat screwdriver and a couple of minutes of time. First, hold down the button below the "Volvo" symbol and at the same time remove the physical key contained in the cover. Then take the flat screwdriver and use it to open the cover completely. Once you have the old battery in front of you, you just have to remove it and replace it with a new one. Finally, replace the cover and replace the emergency key.


Posted on 10 May 2024 by ScegliAuto



How to change the battery of the volvo xc60 key
Volvo Xc60 (2008-2016 / MK 1) How to change the battery of the volvo xc60 key? Let's see the disassembly. We take our ignition key and go with the help of a screwdriver to pry bet
How to replace the battery in the key of the Volvo Xc60?
Volvo Xc60 (2008-2016 / MK 1) In order to replace the battery in the remote control key of the Volvo Xc60 we need a small flat screwdriver or an object that reproduces its appeara
Remove the Volvo Xc60 key
Volvo Xc60 (2008-2016 / MK 1) How do I remove the key from the Volvo Xc60? Let's see the disassembly of the key plastics and the replacement of the battery. We take our remote con

    Frequently Asked Questions

    • Xc60 2017-2024 - What to do if the Volvo XC60 key does not work? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos