Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Battery

With the following guide, you will finally be able to replace the battery in your Volvo XC60 independently and safely. First, turn off the car and make sure the engine bay is cool enough. Then, lift the hood and locate the car's battery. At this point, disconnect both terminals with a proper wrench, remove the security bolts, and take out the battery. Insert the new battery and reconnect the two terminals you removed earlier. Reinstall all the security screws, and the procedure is successfully completed.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Battery replacement for the Volvo XC60
Battery replacement for the Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) These brief and simple steps will show us how to disassemble and replace the battery of the Volvo XC60. First, let's open the rear hatch of the trunk…
How to replace the battery of the Volvo XC60 remote control?
How to replace the battery of the Volvo XC60 remote control?
Volvo Xc60 (2017-2026 / MK 2) In this tutorial we can see how to replace the battery of the Volvo XC60 remote control, a very simple and quick operation. To do this we will need a…
How to replace the remote battery for the Volvo XC60?
How to replace the remote battery for the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this tutorial, you can see how to replace the remote battery for the Volvo XC60, a very simple and quick operation. For this, you will need a smal…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos