Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Conditioning Condenser of the Volvo C30?

Model: Volvo C30 MK 1 - Years 2006-2013
Part: Air conditioning

To replace the air conditioning condenser of the Volvo C30, you need to completely remove the front bumper of the car by unscrewing the screws that secure it: these are located at the top of the bumper and in the inner parts of the wheel arches. Once the bumper is removed, you will have access to the condenser located at its rear; the part must be freed by disconnecting the air pipes and unscrewing the screws that secure it within its housing. After removal, you can reinstall the bumper.

Updated on 24 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to disassemble the air conditioning controls of the Volvo C30
How to disassemble the air conditioning controls of the Volvo C30
Volvo C30 (2006-2013 / MK 1) Below we will see the necessary instructions in order to disassemble and replace the air conditioner controls of the Volvo C30, in simple steps. Firs…
How to Use the Air Conditioning in the Volvo C30
How to Use the Air Conditioning in the Volvo C30
Volvo C30 (2006-2013 / MK 1) To use the air conditioning in the Volvo C30, first turn on the ignition by rotating the key in the ignition switch. Once the dashboard is illuminate…
Where to Find the Fuses in the Volvo C30
Where to Find the Fuses in the Volvo C30
Volvo C30 (2006-2013 / MK 1) The fuses in the Volvo C30 are contained within dedicated fuse boxes installed in the vehicle. This model has two fuse boxes. The first is located in…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos