Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. C30
    4. : How do you use the air conditioning system of the Volvo C30?

Volvo C30 - Video tutorial

Model: Volvo C30 MK 1 - Years 2006-2013
Part: Checks and maintenance
Operation: How do you use the air conditioning system of the Volvo C30?

To use the air conditioner of the Volvo C30, first you need to turn on the instrument panel by turning the key inside the ignition block. Once the panel is on, you can use the buttons located in the center of the dashboard. You can use the left knob to adjust the airflow intensity and the right one to adjust the temperature of the air coming out. With the buttons in the center, you can change the direction of the airflow according to your needs, also activating the defrosters for the rear window and the windshield.


Posted on 7 January 2024 by ScegliAuto



How do I replace the air conditioning condenser on the Volvo C30?
Volvo C30 (2006-2013 / MK 1) In order to replace the air conditioning condenser of the Volvo C30 you have to completely disassemble the front bumper of the car, unscrewing the sc
Where are the fuses located in the Volvo C30?
Volvo C30 (2006-2013 / MK 1) The fuses of the Volvo C30 are contained within the appropriate fuse boxes that are installed on the vehicle: on this car model, it is possible to id
How to disassemble the air conditioning controls of the Volvo C30
Volvo C30 (2006-2013 / MK 1) Below we will see the necessary instructions in order to disassemble and replace the air conditioner controls of the Volvo C30, in simple steps. Firs

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos