Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V60
    4. : How to replace the mirrors on the Volvo S60?

Volvo V60 - Video tutorial

Model: Volvo V60 MK 1 - Years 2010-2018
Part: Outside rearview mirror
Operation: How to replace the mirrors on the Volvo S60?

If we need to replace the outside rear view mirror of the car, we can refer to the steps below: first, obtain a pointed object and insert it into the space between the rear plastic part and the mirror frame, then with a screwdriver, paying great attention, release the internal mirror and disconnect the clamp of the electric adjustment motor. Then open the driver's side flap, remove the plastic panel located at the base of the mirror support. Also remove the plastic profile of the door opening handle, there are screws underneath which must be removed to remove the entire internal door panel. Then disconnect the power supply terminal of the mirror controls and immediately after unscrew the nut that holds the support pin of the mirror itself which will be free at this point.


Posted on 14 December 2022 by ScegliAuto



Volvo V60 cabin filter replacement (also valid for XC60-S60)
Volvo V60 (2010-2018 / MK 1) In this video we see the replacement of the Volvo V60 air filter (but the operation also applies to the contemporary S60 and XC60). The first step is
How to replace the timing belt of the 2017 Volvo V60.
Volvo V60 (2010-2018 / MK 1) With the help of this video tutorial, we will explain how to replace the timing belt of the 2017 Volvo S60. The first thing to do is to remove the fr
How do you replace the fuel filter of the Volvo V60?
Volvo V60 (2010-2018 / MK 1) To replace the diesel filter of the Volvo V60, you need to lift the car so that you can access the components located in the lower part of the engine

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos