Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc40
    4. : How to reset the tire pressure warning light on Volvo XC40

Volvo Xc40 - Video tutorial

Model: Volvo Xc40 MK 1 - Years 2017-2024
Part: Checks and maintenance
Operation: How to reset the tire pressure warning light on Volvo XC40

Thanks to this very short video tutorial, we can see the necessary steps to carry out to reset the tire pressure warning light on a first generation Volvo XC40. Before carrying out this operation, it is important to check the correct pressure of all four tires as indicated by the manufacturer. So first of all we turn on the instrument panel of the vehicle, having done this we use the central display of the on-board computer to enter the menu and the "vehicle status" item, then we enter the item relating to tire pressure where from here it will be possible to carry out the reset of the warning light confirming the operation.


Posted on 18 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Xc40 2017-2024 - What are the indicators of the Volvo XC40? Read Answer
    • Xc40 2017-2024 - What are the problems with the Volvo Xc40? Read Answer
    • Xc40 2017-2024 - What problems does the Volvo XC40 have? Read Answer
    • Xc40 2017-2024 - What warning lights are on the dashboard of the Volvo XC40? Read Answer
    • Xc40 2017-2024 - How much does a service cost for the Volvo XC40? Read Answer
    • Xc40 2017-2024 - How many km do I need to have the Volvo XC40 serviced? Read Answer
    • Xc40 2017-2024 - What warning lights are there in the instrument cluster of my Volvo XC40? Read Answer
    • Xc40 2017-2024 - How much does it cost to have a Volvo XC40 serviced? Read Answer
    • Xc40 2017-2024 - When should a Volvo XC40 be serviced? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos