Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Interval Indicator on the Volvo XC40

Model: Volvo Xc40 MK 1 - Years 2017-2026
Part: Instrument cluster

This brief guide explains the steps to reset the maintenance interval indicator for the Volvo XC40. The following procedure is also valid for the models: XC60, XC90, S90, S60. Follow these steps in order: 1. Turn on the ignition 2. Immediately press and hold the - button of the cruise control located on the left side of the steering wheel 3. After a few seconds, press and hold the brake pedal 4. After a few more seconds, start the engine 5. Once the engine is running, release the brake pedal and continue to hold the - button of the cruise control for about 10 seconds 6. At this point, a yellow warning light will start flashing on the instrument panel 7. When this light has flashed at least 3 times, release the - button of the cruise control. If you followed the previous steps, you have successfully reset the maintenance indicator for your Volvo XC40! This guide is also valid for the following Volvo models: XC60, XC90, S90, S60.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset the service reminder of the Volvo XC40.
Reset the service reminder of the Volvo XC40.
Volvo Xc40 (2017-2026 / MK 1) In this guide, we will see the instructions that will allow us to reset the service maintenance reminder for the oil change of the Volvo XC40. First …
How to Reset the Service Light on a Volvo XC40?
How to Reset the Service Light on a Volvo XC40?
Volvo Xc40 (2017-2026 / MK 1) You can reset the Service light on a Volvo XC40 by pressing and holding the button located on the left side of the steering wheel while the instrumen…
How to Reset the Service Light on a Volvo XC40?
How to Reset the Service Light on a Volvo XC40?
Volvo Xc40 (2017-2026 / MK 1) Inside the Volvo XC40, you can reset the Service light by holding down the button located on the left side of the steering wheel while the instrument…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos