Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

If you have replaced the engine oil and filter on this vehicle model, the following text provides all the necessary information to reset the service light that has illuminated on the instrument cluster. You can also use the images from the video for assistance. Once you access the cabin and sit in the driver's seat, do the following: Press and hold the reset button. Turn the ignition to "ON". Wait for the yellow light to blink three times. Release the reset button, press it again, and release it. A beep will confirm that the operation was successful.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Warning Light on a Volvo XC60
How to Reset the TPMS Warning Light on a Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Today, we will go over the instructions to reset the Tire Pressure Monitoring System (TPMS) light on a Volvo XC60. Before recalibrating the TPMS sens…
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…
Reset of the tire pressure warning for the Volvo XC60.
Reset of the tire pressure warning for the Volvo XC60.
Volvo Xc60 (2017-2026 / MK 2) In this guide, we will provide instructions on how to reset the tire pressure warning light on the Volvo XC60. Before resetting the TPMS sensors, it …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos